AUS
1300 886 649
“E1” is shown on
the display
25
.
Sensor error Unplug the pressure cooker and allow
it to rest for 20 minutes before using it
again. Contact after sales support if the
problem persists.
“E2” is shown on
the display.
Short circuit of the
sensor
Unplug the pressure cooker and allow
it to rest for 20 minutes before using it
again. Contact after sales support if the
problem persists.
“E3” is shown on
the display.
The pressure cooker is
overheated.
Ensure there is enough food and liquid
inside the pot.
Ensure the pot is properly placed
inside the base unit.
Switch the pressure cooker off and
let it cool down for 20 minutes before
using it again. Contact after sales
support if the problem persists.
“E4” is shown on
the display.
The pressure
regulator is not
working properly.
Contact after sales support for repair.
Do not repair the pressure cooker
yourself.
Technical data
Model: KY-318B
Supply voltage: 220–240 V ~ 50 Hz
Power: 1000–1200 W
Capacity: 5.6 L
Working pressure: 60 kPa
Maximum allowable pressure: 200 kPa
Product code: 93550
To Next Page
Loading...