NOTE!
Risk of short circuit!
If water or other liquids enter the housing, they can cause a short
circuit.
- Never immerse the device in water or other liquids.
- Make sure that no water or other liquid gets inside the
housing.
NOTE!
Risk of damage!
Improper handling can damage the device.
- Do not use any harsh cleaning products, brushes with metal
or nylon bristles, or sharp or metallic cleaning materials such
as knives, hard scrapers or similar. They may damage the
surfaces.
Clean the air filter every two weeks or when it is visibly dirty.
1. Pull out the mains plug
.
2. Completely drain the water tank (see section "Draining the water tank").
3. Wipe the device with a slightly damp cloth. Then allow all parts to dry completely.
4. Pull the air filter
out of the housing (see Fig. I).
Clean it with lukewarm water (max. 40°C) and a small amount of neutral
cleaning agent, then leave it to air-dry completely (not in direct sunlight).
5. Put the air filter back in the housing.
Storage
All parts must be completely dry before they are put away.
- Drain the water tank as described in the section "Draining the water tank".
- Always store the device in a dry place.
- Protect the device from direct sunlight.
- Keep the device out of reach of children.
Cleaning
21
To Next Page
Loading...
Need help?
General