18
MODEL No.: CGA18MA.9 • 01/2022 • 707085
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
20 V Li-ion Mini Grinder
19
MODEL No.: CGA18MA.9 • 01/2022 • 707085
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
(toll free)
20 V Li-ion Mini Grinder
Maintenance
Remove the battery pack from the machine before carrying out any
adjustment, servicing, cleaning or maintenance.
NOTE: This product is not suitable for repair or maintenance work by the
unskilled person. The following detail explains how the product is cleaned,
and basic maintenance / safety checks.
Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may
be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease,
etc.
Do not at any time let brake uids, petrol, petroleum-based products,
penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which can result in serious personal
injury.
Cleaning
WARNING. Water or other liquids that have entered the housing
can cause a short circuit. Do not immerse the mini grinder in
water or other liquids.
WARNING. Make sure that no water or other liquids get into the
housing.
WARNING. Do not use aggressive cleaning agents, brushes with
metal or nylon bristles, or sharp or metallic cleaning objects such
as knives, hard spatulas and the like. These can damage the
surfaces.
1) Turn o the mini grinder. Wait until the device stops completely.
2) Remove the battery pack (1).
3) Clean the mini grinder with a soft cloth or brush.
To Next Page
Loading...