20
MODEL No.: CGA18MA.9 • 01/2022 • 707085
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
20 V Li-ion Mini Grinder
21
MODEL No.: CGA18MA.9 • 01/2022 • 707085
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
(toll free)
20 V Li-ion Mini Grinder
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of the
rst 5 year after the date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product
please contact us via our after sales support services, details of which can be
found in this manual and on the product itself. After Sales Support TEL: 1300
889 028 or email: info.aldi@positecgroup.com
What your 5 year warranty means
Troubleshooting
Problem Possible Cause Corrective Action
The mini grinder will
not operate.
Battery pack (1) discharged. Check the battery pack (1).
Battery capacity is low.
Charge the battery pack
(1).
Battery pack (1) is too hot/
cold.
Allow to cool/warm.
The motor is
overheating.
Cooling vents may be
obstructed by dust or other
obstacles.
Clean and clear vents.
Do not cover with hand
during operation.
Disc wobbles or
vibrates.
The clamping bolt (6) is not
tightened.
Tight the clamping bolt
(6).
The disc is ill located on the
spindle.
Locate the disc correctly
on the spindle.
To Next Page
Loading...