Noise/vibration information
27
WARNING!
While actually using the power tool, the vibration and noise emission values may
differ from the values specified depending on how the power tool is used, in
particular which type of workpiece is being worked on.
Safety measures must be defined to protect the operator. They must be based on an
assessment of exposure during actual usage conditions (all parts of the operating
cycle must be accounted for, e.g. periods when the power tool is switched off and
when it is switched on, but not operating under load).
Improper use of the multifunction tool can cause vibration-related ailments.
WARNING!
Depending on how the tool is used and the operating conditions, the following safety
precautions must be taken to protect the user:
− Avoid exposure to vibrations as much as possible.
− Only use accessories in perfect working order.
− Wear vibration-damped gloves when using the multifunction tool.
− Follow the user manual on care and maintenance of the multifunction tool.
− Avoid using the multifunction tool at temperatures below 10°C.
− Plan your work steps so as not to use the strongly vibrating multifunction tool
over several consecutive days.
To Next Page
Loading...
