Safety
Safety
Proper use
The
soldering
iron has been designed for
private
use and
for
the
following hobby
and
DIY
applications:
-
for fine soldering work on, for example,
wires
and
PCBs
The soldering iron should only be used
in
accordance
with the instructions and
safety information in this operating
manual. lt
should
not
be
used for any other
purpose.
Neither the manufacturer nor the dealer accepts
responsibility for
any
damage,
loss or injury resulting from improper use of the soldering
iron. Examples of
improper
use
include the following, in
particular:
-
Any use beyond the specified intended use.
-
Failure to follow the safety, assembly, operating,
cleaning and maintenance
instructions
given
in
this operating
manual.
-
Use
of accessories and spare
parts
which are
not
suitable
for
this soldering
iron.
-
Changes made to the soldering iron or to the accessories.
-
Commercialuse
Anyone using or maintaining this soldering
iron has
to
be familiar with these
instructions and be aware of
potential
hazards. The soldering iron should only be
used by a skilled
person
-
if in doubt ask an expert for advice.
Failure to follow the safety, installation and operating
instructions when using this
soldering iron is considered as improper use.
All
other applicable
local and national
laws have to be complied with. The soldering
iron
should
not be modified. Any
unauthorised modification increases the
risk
of
injury or damage to
property.
Residual risks
Residual risks cannot be completely ruled out even in case of
proper
use.
The
following risks may arise due to the nature of the soldering
iron:
-
Health hazards as a result of working with toxic or
harmful materials
(e.9.
mercury).
To Next Page
Loading...
