Safety
instructions
EN@
Follow the safety instructions contained in this manual. Failure to follow
the safety warnings and instructions may result in injuries caused by
electric shock, burns, fire or toxic fumes.
a) This appliance is not intended for use by
persons
(including
children)
with reduced
physical,
sensory or mental capabilities,
or lack of experience and knowledge, unless they
have
been
given
supervision or instruction concerning use of the
appliance
by
a
person
responsible for their safety.
b) To
prevent
the risk of injury damaged mains cables may only
be replaced by the manufacturer, by customer service or by a
similarly
qualified
person.
c) Allow the soldering
iron
to cool down completely
in
air after
use before
you
put
it away.
rNTq
rhe
soldering
iron has
to
be inserted into the holder when it is
not
being used.
d) Do not use the soldering iron
if
the
handle,
the
mains
cable or the
plug
are damaged. Never open the soldering
iron!
e) Do not expose the soldering
iron
to
moisture or rain.
f) Work
close
to
the
power
socket so that
you
can disconnect the
plug
in
an emergency.
g)
Before heating the soldering
iron,
check
if the tip is mounted
properly
and tighten the
fixing
screw
if necessary.
h) Never heat the soldering
iron without
attaching
a soldering tip.
i)
Remove or change
the soldering tip only when the soldering iron is
switched off and
the soldering tip has cooled down.
j)
Avoid contact between the hot
parts
of the soldering
iron
and the
plastic parts
of the soldering
iron stand.
k) Do not
touch
the hot soldering iron tip, the melted solder or
hot
components
while
soldering,
there is a risk of burns! The soldering
stand can become
hot when the soldering iron is
placed
on it.
l) Do not bring flammable or heat-sensitive objects close
to
the
hot
soldering
iron.
To Next Page
Loading...
