0151 649 1500 1890 946244
www.einhell.co.uk
31
Electric Impact Shredder – GLEKS 2440 Set up
2. Assembling the Shredder
WARNING!
Before start-up, assemble the shredder properly and completely,
including all covers and safety devices.
− Only once you have completed assembly, may you insert the
mains plug in the socket.
You will also need the following tools for assembly:
– PH2 star-headed screwdriver
(You may also need one AF 10 open-ended spanner - to hold the axle whilst the nuts are
tightened).
Before starting the equipment
– Before you connect the equipment to the mains supply make sure that the data on the
rating plate matches that of your local supply.
– Always pull out the power plug before making adjustments to the equipment.
– The chassis and the wheels must be fitted before use. Follow the operating instructions
step-by-step and use the pictures provided as a visual guide to easily assemble the
machine.
66926_3430345_11026_ug_inner.indd 31 22/03/2016 3:22 pm
To Next Page
Loading...
