18
Initial use
Proceed in the order indicated and first insert the batteries in the radio sensor.
Only then will the weather station work properly.
Radio sensor
1. Remove the battery compartment lid
on the back of the radio sensor.
2. Insert two type R03 (AAA) / 1.5 V
batteries, as shown on the base of the
battery compartment.
Pay attention to the correct polarity
(+/-) of the batteries.
3. Reattach the battery compartment lid.
UK Funkwetterstation.book Seite 18 Freitag, 13. Juni 2014 1:47 13
To Next Page
Loading...