50
Other Functions
Battery replacement display
There is a battery change display for each of the base station and radio sensor.
When the symbol for the battery change is displayed, the inserted batteries in the
base station (symbol next to IN)/radio sensor (symbol next to OUT) need to be
replaced with new ones. Then, proceed as described from page 18 .
Please note:
z The battery replacement display for the radio sensors (symbol next to OUT)
indicates the battery replacement for the respective displayed channel number.
z With a battery change, the settings are all lost. After the battery change, proceed
as described from page 18 .
z Always replace all of the batteries and only use those specified in the "Technical
data".
z Even if the base station is operated from the mains supply, any discharged
batteries should be removed from the base station.
z Pay attention to the correct polarity (+/-) of the batteries when inserting them.
z Dispose of old batteries in an environmentally compatible manner, see page 59.
UK Funkwetterstation.book Seite 50 Freitag, 13. Juni 2014 1:47 13
To Next Page
Loading...