EasyManua.ls Logo

ALDI STIRLING STR-TLW70 - Appliance Earthing Requirement

ALDI STIRLING STR-TLW70
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-TLW70 PRODUCT CODE: 700586 04/2020
Getting Started: Installation (Cont.)
WARNING: This appliance must be earthed
In the event of a malfunction or breakdown, earthing will reduce the risk of an
electric shock by providing a path of least resistance for the electric current.
This appliance is equipped with a cord having an equipment-earthing conductor
and an earthing plug. The plug must be plugged into an appropriate outlet that is
installed and earthed in accordance with all local standards and requirements.
Do not modify the plug under any circumstances. If the plug does not fit your
outlet, consult a licensed electrician and have the outlet changed.
When the washer is in use, put the drain hose into a drain spout (or into a sink/tub),
as illustrated below.
CAUTION!
While the washer is in use, ensure the height of the drain hose is at least 70cm,
otherwise the washer will not work properly, or water may flow out in the course of
washing. Also ensure the drain hose is not higher than 1m above ground, otherwise
the washer will not drain water well.
Never lay down the drain hose, as water will
be discharged.
Be sure the drain hose is properly routed
so it will not kink or lift off the sink.

Table of Contents