22
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-TLW70 PRODUCT CODE: 700586 04/2020
Instructions (Cont.)
To set other processes:
• Then press the Process button until the SPIN light flashes; press the Set button
to set the SPIN time.
• Finally press the Start/Pause button: the washer will start operating according to
the set values for wash and rinse water levels, number of rinses and spin time.
Other functions
Water power
The water power affects the pause time of the pulsator and hence the intensity of the
wash. It is automatically selected for the wash and rinse process, however, you can
also adjust it yourself (except for the COTTON, DELICATE and BLANKET programs).
To adjust the water power level:
• Press the Set button after pressing the Start/Pause button.
• Press the Set button again for standard water power: the display will show “H0”.
• Press the Set button again, repeatedly, to increase the water power level from
“H1”, “H2”, “H3” to the strongest: “H4”.
• Press the Set button again, repeatedly, to decrease the water power level from
“L1”, “L2”, “L3” to the weakest: “L4”.
Memory function
When you run the NORMAL, COTTON or HEAVY DUTY program, the machine
memorises your choice of program for the next time you switch on the machine.
NOTE: This function is not available for the DELICATE, BLANKET and QUICK
programs.
Child lock
With the child lock activated, the machine will stop working automatically and sound
an alarm if the washer lid is opened for 5 seconds. To set the child lock:
• Press the Power On/Off button to switch on the power, then press and hold
the Program button for 4 seconds until a buzzer sounds. The child lock will be
activated when the Start/Pause button is pressed.
• To cancel the child lock, repeat the above steps.
To Next Page
Loading...