21
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-TLW70 PRODUCT CODE: 700586 04/2020
Instructions (Cont.)
Adding fabric softener
You can program the machine to stop before the last rinse so that you can add fabric
softener.
• Press and hold the Water Level button for 3 seconds to set the ‘Add Softener’
program. Before the final rinse, the machine will stop and “SF” will show on the
display. It will also emit a beep sound to alert you to add fabric softener.
• You can add the diluted softener directly to the tub, then close the lid and press the
Start/Pause button to continue the program.
NOTE: If you disregard the alarm, the machine will repeat the alarm twice after
5 minutes of inactivity, and then resume the program.
Load sensor (fuzzy control)
For the NORMAL and HEAVY DUTY programs, the machine automatically detects
the weight of your wash load and selects the appropriate water level, wash and spin
time and rinse type. For the QUICK program, the machine will automatically choose
the water level. You do not have to set these values; however, if you want adjust them
yourself, see page 18 for how to customise processes.
Hot / cold / warm water wash
This top load washing machine must be connected to both a cold and a hot
water tap. With both hoses connected to a cold and hot water tap, you can set the
washer to use either just cold water for a cold water wash, or just hot water for a hot
water wash, or both hot and cold water for a warm water wash.
To select the wash temperature, press the Temperature button.
• Cold wash: the indicator light is off.
• Warm wash: the indicator light is on.
• Hot wash: the indicator light is flashing.
Setting the water level and other processes
You can set the water level for wash and rinse processes. For example, if you are
sensitive to detergent residues in your washing, you may want to select a higher water
level for rinsing.
To set different water levels:
• Press the Process button until the WASH light flashes; press the Water Level
button to choose the appropriate water level (it will be shown on the display
screen); press the Set button to set the wash time.
• Then press the Process button until the RINSE light flashes; press the Water
Level button to choose the appropriate water level; press the Set button to set
the number of rinses.
To Next Page
Loading...