Safety
12
www.isc-gmbh.info
GB
AFTER SALES SUPPORT
12
IRE
GB
IRE
0044 151 649 1500
0044 1890 946 244
17. Have your power tool repaired by an electrical technician.
• This power tool complies with applicable safety regulations. Repairs may only
be performed by an electrician who uses original replacement parts; otherwise,
there is a risk of accident for the operator.
18. Noise.
• Wear ear protection when using the compressor.
19. Replacement of the connector cable.
• If the connector cable is damaged, it must be replaced by the manufacturer or an
electrician to avoid risks.
Safety notes when spray painting
• Do not work with paints or solvents whose flash point is less than 55°C.
• Do not heat up paints and solvents.
• When working with liquids that are harmful to health, you must use filter units
(face masks). Also be sure to observe all information regarding protective meas-
ures made by the manufacturers of such substances.
• Observe the information and labels in accordance with the safety warnings pro-
vided on the outer packaging of the materials you are working with. If applicable,
you must also take additional protective measures. This includes in particular
wearing suitable clothing and masks.
• You must not smoke while spraying and in the room where work is performed.
Paint fumes are also highly flammable.
• Fireplaces, naked light or machines that produce sparks must not be present
and/or used.
• Do not store or consume any food or beverages in the work room.
• Paint fumes are harmful to health. Avoid inhaling paint fumes.
• The work room must be larger than 30m³ and there must be adequate ventila-
tion when spray painting and drying.
• Do not spray paint into the wind.
• When spray painting flammable or dangerous substances, observe the require-
ments of your local authority.
• Do not work with fluids like white spirit, butyl alcohol and methylene chloride
when using the PVC pressure hose. These fluids will destroy the pressure hose.
To Next Page
Loading...
Need help?
General
