Technical data
31
www.isc-gmbh.info
AFTER SALES SUPPORT
GB
IRE
0044 151 649 1500
0044 1890 946 244
GB IRE
Technical data
Model: WAC 3050/1
Nominal voltage: 230 V ~
Nominal frequency: 50 Hz
Input power: 2.2 kW
Idle speed n
0
: 2850 rpm
IP code compressor: IP20
IP code motor: IP23
Tank contents: 50 litres
Theoretical suction capacity: 412 l/min
Max. operating pressure: 8.0 bar
Sound power level L
WA
: 96 dB(A)
Sound pressure level: L
pA
: 74 dB
Uncertainty K: 2 dB
Device weight: 42 kg
Article number: 92989
The noise emission data were determined in accordance with EN ISO 2151:2008.
The noise level may increase by
1 to 10 dB(A) depending on the environment where the compressor is set up.
• The compressor fulfils the requirements of EN 61000-3-11 and is subject to con-
ditional connection. This means it is not permitted to use the device with freely
selected connection points.
• In the event of unfavourable grid conditions, the device could produce temporar-
ily fluctuations in voltage.
• The compressor is only designated for use with connection points that
a) do not exceed a maximum permissible grid impedance Z sys = 0.277 Ω,
or
b) have a continuous grid current-carrying capacity of at least 100 A per phase.
• As the user, you must ensure, if necessary as coordinated with your local energy
utility, that the connection point you intend to use for the operation of your com-
pressor fulfils one of the two specified requirements a) or b).
To Next Page
Loading...
Need help?
General
