Storage
27
www.isc-gmbh.info
AFTER SALES SUPPORT
GB
IRE
0044 151 649 1500
0044 1890 946 244
GB IRE
Storage
NOTICE!
Risk of damage!
The compressor can be damaged as the result of incorrect or improper storage.
− Pull the mains plug each time before you store the device.
− Only store the compressor and all connected pneumatic tools in a vented
state.
− Always store the compressor in a dry environment.
− Always store the compressor in a standing position and do not tip it.
− Always store the compressor in a room that is not accessible for children.
− Always store the compressor so that it cannot be operated by unauthor-
ised persons.
1. Pull the mains plug of the compressor.
2. Let the compressor cool off completely.
3. Vent the compressor and all connected pneumatic tools as described in the chap-
ter “Cleaning and maintenance”.
4. Clean the compressor and remove condensed water as described in the chapter
“Cleaning and maintenance”.
5. Only take hold of the compressor by the handle
3
and the transport handle
18
(see fig. A) in order to transport it.
6. Store the compressor on a dry, level surface in a dry room.
To Next Page
Loading...
Need help?
General
