Cleaning and maintenance
21
www.isc-gmbh.info
AFTER SALES SUPPORT
GB
IRE
0044 151 649 1500
0044 1890 946 244
GB IRE
WARNING!
Risk of electric shock!
Water that has penetrated the housing may cause a short circuit. There is a risk
of electric shock.
− Never immerse the compressor in water.
− Never use a high-pressure cleaner to clean the compressor.
− Make sure that no water penetrates the housing.
− Pull the mains plug each time before you clean the device.
− Disconnect the hose and spraying tools from the compressor before clean-
ing.
WARNING!
Burn hazard!
The compressor will become hot during operation.
− Each time before you clean the compressor, let it cool off completely.
NOTICE!
Risk of damage!
Cleaning the compressor with unsuitable cleaners could damage it.
− Never clean the compressor with water, solvents or similar.
− Do not use any aggressive cleaners, sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage the surfaces.
NOTICE!
Risk of damage!
Improper or irregular cleaning and maintenance could damage the compressor.
− Keep all protective devices, vents and the motor housing as free of dust
and dirt as possible.
− Clean the compressor after each use.
To Next Page
Loading...
Need help?
General
