GB
IRE
00800 34 99 67 53
d) Remove all adjusting tools or spanners before you switch the power
tool on. A tool or spanner in contact with a rotating part of the device may
result in injury.
e) Avoid an abnormal posture. Assume a stable position and keep your
balance at all times. This will allow you to have better control of the power
tool in the event of unexpected situations.
f) Wear suitable clothing. Do not wear any loose-fitting clothing or jewel-
lery. Keep your hair, clothing and gloves away from the moving parts.
Loose clothing, jewellery or long hair may get caught in the moving parts.
g) If you can attach dust extractors or collectors, make sure that they are
connected and used properly. Using a dust extractor may reduce risks
associated with dust.
Using and handling the power tool
a) Do not overload the device. Use the right power tool for your work. The
right power tool will ensure that you work more effectively and safely within
the specified power range.
b) Do not use a power tool if its switch is defective. A power tool that can no
longer be switched on or off is dangerous and must be repaired.
c) Pull the plug out of the socket and/or remove the rechargeable battery
before you make any adjustments to the device, change the accessories
or put away the device. This precaution will prevent the power tool from
accidentally starting.
d) Keep unused power tools out of the reach of children. Do not let per-
sons use the device if they are not familiar with it or have not read
these instructions. Power tools are dangerous if used by inexperienced
persons.
e) Take good care of the power tools. Check to make sure that the mov-
ing parts are functioning properly and not stuck, whether parts are
broken or damaged so as to affect the function of the power tool. Have
damaged parts repaired before you use the device. A large number of
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Well maintained cutting tools with
sharp cutting edges are less likely to catch and are easier to guide.
g) Use the power tool, accessories, insertion tools etc. in accordance with
these instructions. At the same time, consider the working conditions
and the work to be performed. Using power tools for applications other
than the intended ones may result in dangerous situations.
To Next Page
Loading...
Need help?
General
