GB
IRE
00800 34 99 67 53
Cleaning
NOTICE!
Risk of damage!
Using unsuitable cleaners could damage the cordless drill and
accessories.
− Do not use any aggressive cleaners, brushes with metal or ny-
lon bristles, as well as sharp or metallic cleaning utensils such
as knives, hard scrapers and the like.
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Do not immerse the cordless drill and the accessories in water.
− Make sure that no water or other liquids penetrate the housing.
1. Before cleaning, pull the mains plug
out of the socket.
2. Let the cordless drill and the charger cool off completely.
3. Push the battery release button
6
of the rechargeable battery
7
and pull the
rechargeable battery out.
4. Wipe the housing of the cordless drill and the charger off with a clean, damp cloth.
Make sure that no water penetrates the housing.
5. Clean the contacts of the rechargeable battery and the cordless drill with a dry,
clean cloth.
6. Then dry the cordless drill thoroughly and let it dry completely for a while.
You do not have to lubricate the cordless drill.
7. Remove drill dust and any wood chips from the quick-action drill chuck.
8. Keep the connection contacts of the charger, the cordless drill and the recharge-
able battery clean.
The cordless drill is now completely clean.
To Next Page
Loading...
Need help?
General
