GB
IRE
00800 34 99 67 53
Noise and vibration information
The specified noise and vibration levels were determined in accordance with the
standards EN 60745-1, EN 60745-2-1 and EN 60745-2-2.
The specified vibration emission level was measured on the basis of a standardised
test procedure and can be used to compare power tools with one another.
The specified vibration emission value may also be used to initially assess the
impairment.
CAUTION!
Risk of injury due to vibrations!
While actually using the power tool, the vibration emission value
may differ from the specified value depending on how the power
tool is used.
− Define safety precautions to protect the user. The impairment
is assessed in consideration of actual conditions of use. (At the
same time, all parts of the operating cycle must be account-
ed for, i.e. including periods during which the power tool is
switched off and during which it is turned on, but not operat-
ing under load.)
CAUTION!
Hearing loss!
Exposure to noise may result in loss of hearing.
− Only work with suitable ear protection.
− Persons nearby must also wear suitable ear protection.
CAUTION!
Noise disturbance!
This device causes a certain unavoidable noise disturbance.
− Perform noisy work during the permissible hours of the day
designated for work of this kind.
− If necessary, observe quiet hours and restrict the duration of
work to the essentials.
To Next Page
Loading...
Need help?
General
