Common Fault Conditions 23
Pulse Companion ‘Status’ Light
Armband LED
The Pulse Companion has a single Red/Green light.
Whilst monitoring the armband LED colour will change as the heart rate varies, please see below for the default
colour the LED will change to;
Light off Device is powered down
Blinking red every 4 seconds
Device is in standby
(Press •
•
• button to start scanning)
Blinking green every second Scanning for armbands
Blinking green rapidly Armband discovered
Blinking green every 4 seconds User is being monitored
Blinking red every second Heart rate high / low alarm condition
Blinking red/green/red/green Alarm has been disarmed
Blinking red/green/green Fault 26 - Check Armband
Blinking red/red/green Fault 18 - Armband Lockup
Three red flashes Charging
Blinking purple every 1.5 seconds No heart rate detected
Red for 2 seconds Unit is shutting down
To Next Page
Loading...
