Need help?Do you have a question about the ALERTON AZW-5000 and is the answer not in the manual?
General instruction to read all safety and installation guidelines carefully before proceeding.
Emphasizes adherence to National Electric Code and local authority regulations.
Highlights product susceptibility to ESD and recommends grounding techniques.
Advises electricians to assume voltages are hazardous and perform safety checks.
Warns about unexpected high voltages and lightning risks with low-voltage wiring.
Guides on separating power/lighting wiring from communications wiring to prevent interference.
Details FCC compliance for Class A digital devices and potential radio interference.
Provides physical measurements of the AZW-5000 unit.
Specifies the typical power consumption of the AZW-5000.
Explains how to use header-style termination blocks for wiring.
Details requirements for powering the AZW-5000 with a 24VAC transformer.
Provides guidance on sizing transformers for AZW-5000 power supply.
Covers proper grounding and wiring of the AZW-5000 power supply.
Discusses choosing the correct wire size for power supply runs to prevent voltage loss.
Describes how to terminate MS/TP LAN cabling on the AZW-5000.
Details guidelines for proper grounding of MS/TP cable shields to prevent issues.
Provides instructions for mounting the AZW-5000 device.
Guides on connecting an external antenna for improved radio signal strength.
Explains how to connect the AZW-5000 to its parent controller via MS/TP.
Details how to connect the AZW-5000 to a 24VAC power source.
Describes how to check if the AZW-5000 is powered up via its status indicator.
Explains how to interpret MS/TP status indicator flashes for communication status.
Details how RF signal indicator flashes indicate communication with other devices.
Describes how RSSI LEDs indicate radio signal strength.
Lists and describes the Analog Values (AVs) and Binary Values (BVs) for WTS integration.
Explains how to download and update the device's ROC file.
Outlines the process for replacing a failed AZW-5000 unit.
Describes how to view previously saved commissioning data for the device.
Provides steps to improve radio signal strength and reception.
Explains error conditions indicated by RSSI LED flash sequences.
Offers solutions for devices not appearing during a device scan.
Addresses issues with incorrect temperature readings from WTS devices.
General| Brand | ALERTON |
|---|---|
| Model | AZW-5000 |
| Category | Controller |
| Language | English |
To Next Page
