Alesis 3 - SPECIFICATIONS

SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
FREQUENCY RESPONSE 20Hz - 15KHz (Effect), 20KHz (Direct), ±2dB
DYNAMIC RANGE 85dB
HARMONIC DISTORTION .15% @ 1KHz @ 0 dBV
INPUT
NUMBER OF CHANNELS 2
NOMINAL LEVEL +4dBV
MAXIMUM LEVEL +20dBV
IMPEDANCE 50KΩ per channel in stereo
25KΩ per channel in mono
A/D - D/A CONVERSIONS
CONVERSION SCHEME 16 bit Linear PCM
PROCESSOR SPEED 2 Million Instructions per Second
PROCESSOR MEMORY 16K x 16 bit
SAMPLING FREQUENCY 31.25KHz
OUTPUT
NUMBER OF CHANNELS 2
FORMAT Matrixed Stereo
MAXIMUM LEVEL +14dBV (Effect), +20dBV (Direct)
IMPEDANCE 470Ω
FRONT PANEL
CONTROLS Input Level Program Variation
Mix Level High EQ
Output Level Low EQ
Program Selection
INDICATORS Tri-colored LED Level Indicator
REAR PANEL
JACKS Input Left and Right - 1/4”
Output Left and Right - 1/4”
Defeat - 1/4”
Power - 5.5mm Barrel Jack
POWER REQUIREMENTS 9 Volts AC, 5 Volt Amps external Transformer, UL approved and made in USA
DIMENSIONS (W x H x D) 19”x1.75”x4”
WEIGHT 2 lbs. 10 oz.