Why can't I select ANALOG input on my Alesis Recording Equipment?
If you cannot select ANALOG input, it may be because the song is initialized at 88.2 or 96 k sample rate. To record at high rates, obtain 96k Analog board or use a 44.1/48k song.
General| Brand | Alesis |
|---|---|
| Model | ADAT-HD24 |
| Category | Recording Equipment |
| Language | English |
A numbered list outlining the main technical specifications and capabilities of the ADAT HD24.
Lists essential safety precautions and warnings for operating the ADAT HD24.
Initial steps for connecting the ADAT HD24 to a mixer for basic audio routing.
Instructions for preparing and selecting the hard drive for recording and playback.
A guide to performing a simple test recording and playback to verify functionality.
Details on connecting the AC power cable and proper grounding procedures.
Step-by-step guide on the process of recording audio onto the ADAT HD24.
Covers arming tracks for recording and setting appropriate input and recording levels.
Details how to select input sources (Analog/Digital) and control input monitoring.
Instructions for playing back recordings, scanning through songs, and scrubbing audio.
Introduces locating points and special points with automated function capabilities.
Details how to set up loops using locate points for continuous playback or recording.
Instructions for setting up automated punch-in and punch-out recording.
Explains how drives are mounted, selected, and how their status is indicated.
Details the process for safely dismounting drives before removal.
Covers manual drive selection, adding drives, and disk formatting procedures.
Guides on installing IDE drives into caddies and obtaining drive information.
Instructions for backing up songs and entire drives for data safety.
Details the procedures for cutting and copying audio regions between tracks or songs.
Explains how to paste audio regions into different locations, tracks, or songs.
Describes the Undo command and how the edit buffer manages undo levels.
Overview of synchronization techniques including MIDI Time Code and SMPTE.
Guides on setting the IP address, subnet mask, and gateway for the ADAT HD24.
To Next Page
