Chapter 2: Playing the A6
ANDROMEDA A6 REFERENCE MANUAL 41
PROG Page Parameters
The abbreviation for “Program,” this page is where you set the level, pan and output
jacks, transpose and fine tuning amounts, and MIDI Channel settings for the selected
Mix Channel.
This is also where you can select a Program for the Mix Channel using the PROGRAM
GROUP and PROGRAM NUMBER buttons.
PAGE PARAMETER
OPTIONS
or RANGE
DESCRIPTION
PROG
LEVEL 0 ··· 100
Sets the output level of the current Mix Channel.
PAN -100 ··· +100
Sets the “placement” of the Mix Channel’s
output in the left-to-right stereo panorama.
-100
is full left, +100 is full right and 0 is center.
OUTPUT - OFF -
MAIN
AUX
Routes the audio output of the current Mix
Channel to either the rear panel
MAIN output
jacks, the
AUX jacks or off. Note that the
headphones will be active only when
MAIN is
selected in the display.
SEMI -60 ··· +60
Sets the transpose amount of the current Mix
Channel in semi-tones, ± 5 octaves.
CENTS -100 ··· +100
Sets the transpose amount of the current Mix
Channel in semi-tones, ± 5 octaves.
MIDI CH 1 ··· 16
Sets the MIDI Channel that the current Mix
Channel will use to send and receive.
To Next Page
Loading...
Need help?
General
