63
4.11 EDITING 5-BAND EQ AND RESONATOR
PARAMETERS (config 4)
EQ Preset
The display says:
EQ PRESET:
U SER
This page allows you to access 6 preset tone curves, or to create your own
curve from scratch. The EQ and/or resonator parameters of the 6 preset
curves have been programmed to give you a variety of tones to choose
from. To listen to each tone curve, press the Up VALUE button which
will scroll through presets 1 through 6. If you find a preset you like, you
can store it to the current program by pressing the STORE button twice.
To use a preset as a starting point for your own custom tone curve,
simply edit its EQ and/or resonator parameters until you have the sound
you want (for more about the specific parameters, see their explanations
below). Then press the STORE button twice. This will store the edited
tone curve as part of the program that you are currently working on. The
next time you call up that program, your edits will appear as the
program's USER curve.
Configuration 4 has 6 tone curves. They are:
¥ #1 (5 Band EQ Mode)
¥ #2 (5 Band EQ Mode)
¥ #3 (5 Band EQ Mode)
¥ #4 (5 Resonator/3 Band EQ Mode)
¥ #5 (5 Resonator/3 Band EQ Mode)
¥ #6 (5 Resonator/3 Band EQ Mode)
To Next Page
Loading...
