Alesis GT - MID EQ Frequency; MID EQ Bandwidth; MID EQ Amplitude

71
Mid EQ Frequency
The display says:
MID EQ FREQUENCY
2 000Hz
The midrange filter is a parametric type. This parameter sets the
midrange frequency at which signals will be boosted or cut.
Mid EQ Bandwidth
The display says:
MID EQ BANDWIDTH
1 .00 OCTAVES
Bandwidth refers to the width (range of frequencies) of the band of
frequencies that will be affected by the EQÕs boost and cut values.
Example: A bandwidth of one octave boosts a wider range of frequencies
than a bandwidth of 0.2 octaves.
Mid EQ Amplitude
The display says:
MID EQ AMPLITUDE
+ 0 0.00dB
This sets the amount of boost (positive numbers) or cut (negative
numbers) at the Mid EQ Frequency set on the Mid EQ Frequency page.