Alesis GT - Editing Mix Parameters by Configuration

65
All three midrange filters are parametric types. This parameter sets the
lower midrange frequency at which signals will be boosted or cut.
Low Mid EQ Bandwidth (5 Band EQ mode only)
The display says:
LO MID EQ WIDTH
1 .00 OCTAVES
Bandwidth refers to the width (range of frequencies) of the band of
frequencies that will be affected by the EQÕs boost and cut values.
Example: A bandwidth of one octave boosts a wider range of frequencies
than a bandwidth of 0.2 octaves.
Low Mid EQ Amplitude (5 Band EQ mode only)
The display says:
LOW MID EQ AMP
+ 0 0.00dB
This sets the amount of boost (positive numbers) or cut (negative
numbers) at the lower midrange frequency set on the Low Mid EQ
Frequency page.
Mid EQ Frequency
The display says:
MID EQ FREQUENCY
2 000Hz
All three midrange filters are parametric types. This parameter sets the
midrange frequency at which signals will be boosted or cut.