Alfa Laval Port filter User Manual

Before installation
Preparation of the plate heat exchanger before installation of the port filter.
1. Prepare the installation area around the plate heat exchanger and ensure
that required space is available.
2. Installing port filter into an existing plate heat exchanger require
preparation to ensure that correct port arrangement is in place for the
installation. Consult Alfa Laval representative if any hesitation.
3. Shut down, isolate and drain the plate heat exchanger by following the
instruction in section Shut-down
4. Install port filter according to the section Installation of port filter
200001927-2-EN-GB 7

Alfa Laval Port filter Specifications

General

Brand	Alfa Laval
Model	Port filter
Category	Water Filtration Systems
Language	English