24
1
2
4
1
2
4
3
3
2
1
5
2
1
[A] [B]
3
4
5
6
E
F
1
2
3
4
0
1
2
4
3
5
0
Blind Stitch Hemming
Pattern selector: E or F
Presser foot: Zigzag foot
Thread tension: 2–4
Stitch length: 1–3
Stitch width: 5
Hem guide
4
1
2
3
1 Fold up the hem and fold it back to from a 0.4 to 0.7cm
(1/4") allowance as illustrated.
1
2
Wrong side of the fabric
0.4 to 0.7 cm (1/4")
[A] Heavy weight fabrics
[B] Fine or medium weight fabrics
4 Open the fold flat.
Right side of the fabric
* If the needle drops far left, the stitches will show on the
right side of the fabric.
5
3
4
2 Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw and
the shank of foot holder.
Tighten the screw making sure the wall of hem guide
is placed in the middle of the toes of the presser foot.
3 Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better control so
that the zigzag stitches fall on the hem allowance and
pierce the soft fold. While sewing, make sure the fold
runs along the wall of hem guide.
Screw
Hem guide
5
6
To Next Page
Loading...
