Alfa Network 2622 - Connecting the Machine to the Power Supply; Foot Control

4
1
2
3
4
5
6
Connecting the Machine to the Power Supply
Before connecting the power cord, make sure the voltage and
frequency shown on the machine conform to your electrical power.
1. Turn off the power switch.
2. Insert the machine plug into the machine socket.
3. Insert the power supply plug into the outlet .
4. Turn on the power switch to turn on the power and sewing
light.
Foot control
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the machine runs.
1
Power supply plug Power switch
Outlet Machine socket
Machine plug Foot control
2
3
4
5 6
Caution : Do not place anything on the foot contorol, otherwise
the machine will start advertently.