Alfa Network A1930 - Adjusting the Height of the Presser Bar; Threading the Machine Head

6
WARNING
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start
of the sewing machine.
WARNING
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start
of the sewing machine.
13. ADJUSTING THE HEIGHT OF THE PRESSER BAR
1) Loosen setscrew 1 and adjust the presser bar height or the angle of
the presser foot.
2) After adjustment, securely lighten the setscrew 1.
14. THREADING THE MACHINE HEAD
The needle bar should be at the highest position at its stroke; thread the machine in the order shown as above.