Alfa Network A1930 - One-Touch Type Reverse Feed Stitching Mechanism; Electronic Clip Wire

12
WARNING
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start
of the sewing machine.
WARNING
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start
of the sewing machine.
24. ONE-TOUCH TYPE REVERSE FEED STITCHING MECHANISM
(1) How to operate
1) The moment button 1 is pressed, the machine performs
reverse feed stitching.
2) The machine performs reverse feed stitching as long as
the button is held pressed.
3) The machine resumes normal feed stitching the moment
the button is released.
(2) Height of the switch lever
1) Adjust the height of switch lever 1 so that I can be easily
operated.
25. ELECTRONIC CLIP WIRE
1) Electronic clip wire 1.
2) Electronic clip wire 2 open as 1 mm.