EasyManuals Logo

Alfano 6 User Manual

Alfano 6
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Temperatures
Temperatures: Your Alfano 6 can read two
temperatures. These are connected to the red input on
your Alfano 6. If you want to simultaneously read the
two temperatures listed below, you will have to use a
Y-connector (ref: A2190) or Box12 (ref: A1160)
Water temperature: To install this sensor we recommend using the
location provided for this purpose on your engine or our hose
adapters and place the sensor in the space provided for this
purpose.
References Water Temperature Sensor: A2101, A2152
References Adapter Hoses: A261, A262, A263
In order to monitor the temperature of your engine, you can use one of the two LEDs alarms and set
a minimum and maximum temperature.
Configuring your alarms (LEDs): In your "Display Config" submenu, enter the Max or Mini
LED left (or right) alarm submenu. Here you can set the temperature type (in this case T ° 1
Water / Cylinder head) but also the maximum or minimum temperature, the color of the
LED and its display mode.
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alfano 6 and is the answer not in the manual?

Alfano 6 Specifications

General IconGeneral
BrandAlfano
Model6
CategoryTimer
LanguageEnglish