EasyManua.ls Logo

Alfano 6 - Speed Sensor Installation and Configuration; Pedal Sensor Installation

Alfano 6
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional equipment
Sensors :
Speed sensor (ref: A2203):
This sensor allows to know your speed relative to the rotation
of the ring placed on the axle. This data is a more accurate,
more responsive and real-time representation of your speed
than that presented by the GPS module (professional use).
This sensor will allow you for example to better identify the
moments when your karting is not touching the tarmac
Pedal Sensor (ref: A2405):
This sensor allows to know the position of each
of the pedals during your analysis (App and
software).
The installation of this sensor requires the use of
a Box4Move (A1204) or Box12 (A1160). For more
information please refer to the previous page.
The calibration functions will unblock with the
connection of one of these products and are
available in the Settings menu.
To correctly configure your displayed speed, go to the parameter
menu and then in the "Speed sensor" sub-menu to select the
number of magnets in the ring and the circumference of the
wheel (this measurement must be taken with a designer ribbon).
to take into account the wear and pressure of the tire)
Ring Reference : A441, A442, A443, A444, A445, A4461
14