Temperatures
Exhaust Temperatures: Most of today's kartings have
an exhaust that provides a hole for sensor placement.
If not, we recommend welding a nut (Ref: A272A) to fix
the sensor.
References Exhaust Sensor:
A2151 (Professional), A2158 (Standard)
For the use of this type of sensor, an extension (Ref:
A3401) will be necessary.
Configuring your alarms (LEDs): In your "Display Config" submenu, enter the Max (or the
left) Alarm LED submenu Max or Mini. Here you can configure the temperature type (in this
case T ° 2 Exhaust gases) but also the maximum or minimum temperature, the color of the
LED and its display mode.
Caution: For greater durability of your equipment we invite you to configure these two
parameters as well as related alarms according to manufacturer recommendations or to
seek advice from your dealer or preparator.
9
To Next Page
Loading...