Viewing Configuration
By default the backlighting is activated automatically thanks
to a brightness sensor but you can choose to activate or
desactivate it permanently
Choose the color of your backlight according to your
preferences
Set the intensity of your backlight here
Set the intensity of the indicator lights on the top of your
device according to your preferences. These LEDs can show
you several types of information such as RPMs,
temperatures, lap times and more. You will find information
on this topic in the chapter "Display Course".
1. Backlighting :
2. Color:
3. Power :
4. LED Power :
Driver name: In the settings menu you can enter the names of the drivers (up to 6) on
the headset icon so that they appear on the home screen and in your datas.
Standby: In the settings menu you will find the sub-menu "Standby" where you can
set the time before stand-by (in minutes) as well as the idle time before the Alfano 6
stops.
While on standby, the Alfano 6 consumes almost no energy and will light up when an
RPM signal is received (see "The RPM Sensor" - page 7) or by pressing the "On /
Off" button ".
5
To Next Page
Loading...
General