Setup
L'Alfano 6 : The Alfano 6 is designed for installation on your steering wheel. You can
instal it in place using the screw thread on the back of the unit and the nut (supplied).
For a greater comfort of use and a reduction of vibrations pay attention to place on both
sides of your steering wheel the rubber washers (provided). The shell of your device
should not hit against your steering wheel, if needed you can use the black washer to
space out your device.
Before continuing your use of the Alfano 6 we recommend that you configure your
device according to your requirements and preferences to facilitate its use and any
future manipulations.
Info : You can get at any time more information directly on your Alfano 6 thanks
to the "info" option accessible by pushing the central right button of your Alfano 6
2
To Next Page
Loading...
General