AlgoForce E1500
19
Release Note for Software V1.0.8
Software V1.0.8 was released on 13/02/2024. The following changes were made with respect to the
previous software V1.0.7:
1. The activation time for a long key press function has been reduced from 1.5 seconds to 0.7
seconds. For example, the time duration between pressing and holding the ground balance key and
the commencement of actual ground balancing is now 0.7 seconds, as opposed to 1.5 seconds.
Other functions requiring a long key press are similarly affected, including vibration adjustment and
auto frequency scan.
2. In version 1.0.7, Pinpoint mode and the main detection mode shared the same volume and
vibration controls. With the introduction of v1.0.8, Pinpoint mode now features independent volume
and vibration controls separate from the main detection mode. Users can customize their preferred
volume and vibration settings in either mode. Furthermore, the volume and vibration settings in
both modes are saved during power down for convenience.
15/02/2024
To Previous Page
Loading...
