154
SECTION 10: REMOTE ACCESS
SECTION10
Remote Access
If you NVR is connected to a local network (LAN), you can access it from another computer on the LAN through Microsoft® Internet
Explorer®. If using IE 10 or higher, you must congure it for “Compatibility” mode for the IP address you are logging into.
When connecting to the NVR, you must enter a User Name and Password. Note that some user permissions disallow remote access
and/or features of this access method.
When logging into the NVR from a remote computer for the rst time, you must install a plug-in program named WebComponents.
The procedure for installing the program using Internet Explorer 11 is shown below. Subsequent log ins do not require you to
reinstall WebComponents.
10.1 Remote login
To access the NVR from a computer on the LAN:
1. Open an Internet browser on your remote compute and enter the IP address of the NVR in the URL eld. In the example below,
the IP address of the NVR is 192.168.75.74.
Select language