Alienware AW2725DF - Rear and Bottom View

About your monitor | 13
Rear and bottom view
Rear and bottom view without monitor stand
6 Cable-management slot (at
the back of
the stand)
To organize cables by routing them
through this slot.
7 I/O cover Protects the I/O ports.
Label Description Use
1 Power connector Connect the power cable (shipped with your
moni
tor).
2 SuperSpeed USB
5 Gbps (USB 3.2 Gen 1)
Ty
pe-B upstream port
Connect the USB cable (shipped with your
monitor) to this port
and your computer to
enable the USB ports on your monitor.
3 SuperSpeed USB
5 Gbps (USB 3.2 Gen 1)
Type-A downstream
ports (3)
Connect your USB 3.2 Gen 1 (5 Gbps)
device.
NOTE: To use these ports, you must
connect the USB cable (shipped with
your monitor) to the USB upstream
port on the monitor and to your
computer.
NOTE: To prevent signal interference,
avoid connecting other USB devices to
the adjacent port when using a wireless
USB device on a downstream USB port.
Label Description Use