Alienware AW2725DF - Page 52

52 | Operating the monitor
Input Source Use this menu to select between the different video
sign
als that may be connected to your monitor.
DP 1 Select the DP 1 or DP 2 input when you are using the
DisplayPort (DP) connector. Press the joystick to
confirm the selection.
DP 2
HDMI Select the HDMI i
nput when you are using the HDMI
connector. Press the joystick to confirm the selection.
Auto Select Automatically scans for available
input sources. Press the
joystick to confirm the selection.
Options for
DP/HDMI
Allows you to set this feature to:
• Prompt for Multiple
Inputs: Always displays the
“Switch to DP/HDMI Video Input” message for you
to choose whether to switch or not.
• Al
ways Switch: Always switches to DP/HDMI video
input (without asking) when the DisplayPort or HDMI
cable is connected.
• Of
f: Never automatically switches to DP/HDMI
video input when the DisplayPort or HDMI cable is
connected.
Press the joystick to confirm the selection.
NOTE: This feature is disabled when Auto Select
is set to Off.
Reset Input
Source
Resets all settings under the Input Source menu to
the
factory defaults.
Icon Menu and
submenu
De
scription