Alienware Command Center (AWCC) | 9
Installing AWCC from the Dell Support website
1. Download the latest version of the following applications from
www.dell.com/support/drivers.
• Alienware Command Center
• Alienware Gaming Peripheral driver
2. Navigate to the folder where you saved the setup les.
3. Double-click the setup le and follow the on-screen instructions to install
the application.
NOTE: You can customize the mouse features and lighting effects by
using the Alienware Command Center (AWCC) application.
Updating the mouse firmware
NOTE: For best performance, update your mouse firmware to the latest
version.
Updating the mouse firmware automatically through AWCC
1. Connect your mouse to your computer through the USB cable.
2. Launch AWCC software and click the FX tab.
3. Under Settings, select Alienware AW320M Wired Gaming Mouse from
the Edit Device Settings drop-down list.
4. Click the Settings tab.
5. In the Update tab, click the Update button. Once the rmware update is
complete, the “Firmware updated successfully” message is displayed.
6. Click OK.
NOTE: Disconnecting the USB cable from the computer, closing the
AWCC software, or shut down of computer during firmware update may
damage the mouse.
To Next Page
Loading...
