About your monitor | 11
5 Downlights When the monitor is completely set up, tap
th
e touch sensor to turn the downlights on or
off.
NOTE: The factory setting is on, so the downlights are active if the
power cable is connected. To change the default settings, see
AlienFX Lighting.
NOTE: Wh
en the Spectrum function is On, the downlights are
turned off.
Monitor State
On
No Signal
Standby
Downlights Status
When Spectrum is Off
When Spectrum is On
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
To Next Page
Loading...
