17
Installing AWCC through Windows Update
1. Connect your Alienware USB wireless dongle to your computer through USB
port. The AWCC application is downloaded and installed automatically.
2. The AWCC installation may take up to 10 minutes to complete.
3. Go to the program folder to ensure that the AWCC installation is complete.
Launch the AWCC application and perform the following steps to download
additional software:
▪ In the Settings window, click Windows Update.
▪ Click Check for updates to check the Alienware driver update progress. If
the driver update is not responding on your computer, install AWCC from the
Dell support website.
Installing AWCC from the Dell Support website
1. Download the latest version of the following applications at
https://www.dell.com/support/drivers
▪ Alienware Command Center
▪ Alienware Gaming Headset driver
2. Go to the folder where you saved the setup files.
3. Double-click the setup file and follow the on-screen instructions to install the
application.
NOTE: You can customize the headset features and lighting effects by
using the AWCC application.
Activating Dolby Atmos for Headphones
The headset automatically activates Dolby Atmos when connected to Microsoft
Windows 10 or Microsoft Windows 11 computer by following the steps below:
1. Go to the Microsoft Store.
2. Download the free Dolby Access app.
3. Connect the headset to the computer.
4. Once connected, Dolby Access will detect your device and activate Dolby
Atmos for Headphones.
To Next Page
Loading...
