Alienware m15 - Create a USB Recovery Drive for Windows

Create a USB recovery drive for Windows
Create a recovery drive to troubleshoot and  problems that may occur with Windows. An empty USB  drive with a
minimum capacity of 16 GB is required to create the recovery drive.
NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support
site for latest instructions.
1 Connect the USB  drive to your computer.
2 In Windows search, type Recovery.
3 In the search results, click Create a recovery drive.
The User Account Control window is displayed.
4 Click Yes to continue.
The Recovery Drive window is displayed.
5 Select Back up system  to the recovery drive and click Next.
6 Select the USB  drive and click Next.
A message appears, indicating that all data in the USB  drive will be deleted.
7 Click Create.
8 Click Finish.
For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your
product's Service Manual at www.dell.com/support/manuals.
6