Alienware x15 R1 User Manual

Steps
1. Peel the headset port cable from the fan and heat-sink assembly.
2. Disconnect the camera cable from the system board and peel the tape that secures the camera cable to the system board.
3. Disconnect the Alien head LED cable from the system board and peel the cable from the system board.
4. Open the latch and disconnect the power-button cable from the system board.
5. Peel the tape that secures the I/O-board cable to the system board.
6. Open the latch and disconnect the I/O-board cable from the system board and remove it from the routing guides on the fan and
heat-sink assembly.
7. Disconnect the headset-port cable from the system board and remove it from the routing guides on the fan and heat-sink
assembly.
8. Disconnect the speaker cable from the system board.
9. Open the latch and disconnect the keyboard-controller board cable from the system board.
10.Disconnect the power-adapter port cable from the system board.
48

Alienware x15 R1 Specifications

General

Processor	Up to 11th Gen Intel Core i9-11900H
Graphics	Up to NVIDIA GeForce RTX 3080 8GB GDDR6
Display	15.6-inch FHD (1920 x 1080) 165Hz
RAM	Up to 32GB DDR4 3200MHz
Storage	Up to 2TB PCIe M.2 SSD
Operating System	Windows 10 Home, Windows 10 Pro
Battery	6-Cell, 87 WHr Lithium Ion
Weight	2.36 kg (5.2 lbs)
Ports	1 x HDMI 2.1, 3 x USB 3.2 Gen 1 Type-A, 1 x Thunderbolt 4, 1 x MicroSD card reader
Wireless	Killer Wi-Fi 6 AX1650 and Bluetooth 5.2