Alinco DJ-496 - User Manual

Important safety advice for operating the transceiver safely.

Important warnings about handling the transceiver and avoiding damage.

Guidelines for safe and responsible radio transmission practices.

Advice on using external power supplies with the transceiver.

Lists optional accessories for the transceiver.

Instructions on connecting various accessories like antenna and battery.

Identifies and explains the function of each part of the transceiver.

Details the functions of each key on the DTMF keypad.

Explains the various symbols and indicators shown on the LCD display.

Step-by-step guide on how to switch the transceiver on and off.

Instructions for adjusting the squelch level to silence background noise.

Guide on how to set the audio volume level for the transceiver.

Explains how to set the operating frequency using the VFO mode.

Details how to store and recall frequencies using memory channels.

Describes how to use the dedicated call channel for quick access.

Instructions on how to receive signals and use the monitor function.

Guide on how to transmit signals and adjust output power.

How to use scanning functions to find signals automatically.

How to activate the keylock to prevent accidental operation.

Details the tone burst function for European repeaters.

How to assign names to memory channels for easier identification.

Function to automatically turn off the transceiver to save battery.

Limits continuous transmission time to prevent overheating or interference.

Information on how to operate the display and keypad backlight.

Using Tone Squelch or DCS to communicate with specific stations.

Setting up and using the Tone Squelch feature for selective calling.

Setting up and using the Digital Code Squelch (DCS) feature.

Manually sending DTMF codes during transmission.

Using the auto dialer to send pre-programmed DTMF codes.

Transmitting the last output DTMF code.

Activates an alarm if the transceiver is stolen.

Outputs 5V from the MIC jack for external control.

Outputs a high-frequency sound to repel mosquitoes.

Overview of how to operate the Set Mode and its functions.

Step-by-step guide to accessing and navigating the Set Mode menus.

Details on specific functions configurable within the Set Mode.

How to copy transceiver settings between units using a cable.

Instructions for data communication using a computer.

A guide to diagnose and resolve common transceiver problems.

How to reset the transceiver to its factory default settings.

Lists available optional accessories for the transceiver.

General specifications for the DJ-196/195R model.

Technical specifications for the transmitter section.

Technical specifications for the receiver section.

General specifications for the DJ-496 model.

Technical specifications for the DJ-496 transmitter.

Technical specifications for the DJ-496 receiver.