Alinco DR-MD500 - Page 7

7
is only valid for analog channel.
VFO / MR
Switch between VFO mode and memory channel mode.
Scan
Scan on/off
FM Radio
FM radio on/off
Alarm
Long press the key to start alarm, short press again to exit the alarm.
Record Switch
Enable/disable the recording function
Record
Start/stop recording. When stop recording, the radio will remind repeat
or send the record. Radio can record both TX and RX voice during the
call.
SMS
In digital mode, press to enter into SMS messages
Dial
Start the manually dial
Monitor
Monitor the weak signal or the signal with unmatched ID.
Main CH Switch
Choose channel A or channel B as the main channel
Hot Key 1~6
Selects Hot Keys 1-6 Note: Hot key setup details on next page
Work Alone
Turn on/off the work alone function.
Nuisance Delete
During scanning, press the key to skip the unwanted channel
Digi Monitor
In DMR mode, press the key to turn on/off digital monitor
Sub CH On/Off
Turn on/ off the sub channel
Priority Zone
Switch to Priority Zone
Program Scan
"Press the key to start the scan in VFO channel scan start and end
frequency must be programmed in CPS."
Enhanced Sound
In digital channel, switch the microphone tone to normal or enhanced
mode
Last Call Reply
In digital channel, press the key to access the last call and press PTT to
call back.
Switch ChType
Switch the channel type (Analog, Digital, Ana+Dgi, Dgi+Ana)
Roaming
In standby, press the key programmed as "Roaming" to search and
lock on the repeater with strongest signal. (Note: After lock on a
repeater, the radio will return to last frequency only after channel or
frequency is changed. The repeater frequency list must pre-
programmed in CPS.)
Max VOL Set
In standby, press the key programmed as "Max Volume", will enable
users to set the maximum RX volume.
Slot Set
Choose Slot for current channel, this function is only valid in repeater
mode.
Zone Select
In standby, press the programmed "Zone Select" key, it will allow you
input the zone number and then press confirm key will switch to the
zone.
A CH Mute
Mute the main channel
B CH Mute
Mute the sub channel
Roaming Set
Enter into Roaming menu quickly
Zone Up
Switch the zone upwardly
Zone Dn
Switch the zone downwardly
Exit
Exit the menu (only for A-D short press)
Menu
Enter into the menu (only for A-D short press)
Hot Key Setting for P1, P2, P3, P4, P5, P6, PA-PD
Enter radio Menu-Settings-Radio Set-P1-P6, PA-PD, sub menu. User can choose settings for Hot
Keys 1-6.
Hot Key function details must be setup in CPS - Public - Hot key.