Need help?Do you have a question about the Alinco DR-03T and is the answer not in the manual?
General| Brand | Alinco |
|---|---|
| Model | DR-03T |
| Category | Transceiver |
| Language | English |
Details FCC rules and device compliance.
Provides company information and legal rights.
Explains hazard symbols used in the manual.
Safety guidelines for operating environment.
Safety guidelines for physical handling of the device.
Safety guidelines related to power sources.
Precautions for using the cigar-lighter cable.
Procedures to follow in emergency situations.
Safety precautions during maintenance.
Additional environmental cautions.
Key points to consider before operating the device.
Instructions on how to best use the manual.
Highlights advanced functions and design.
Compares features across different transceiver models.
Lists all standard accessories provided in the package.
Details on warranty policy.
Instructions for setting up as a base station.
Guidelines for installing in a vehicle.
Guidance on antenna installation for mobile use.
Instructions on mounting the transceiver unit.
How power supply and lamps function.
Feature for displaying voltage on DR-06T.
Identifies and explains front panel buttons and knobs.
Lists core functions of front panel controls.
Explains secondary functions accessed via the FUNC key.
Describes functions activated by holding a key.
Details ports and connectors on the rear.
Explains symbols and indicators on the LCD display.
Identifies and describes each element shown on the display.
Explains buttons and their uses on the microphone.
Shows pinout for the microphone connection.
Procedures for powering the transceiver.
How to adjust the audio output volume.
How to adjust the squelch to filter noise.
How to use the Variable Frequency Oscillator mode.
Adjusting frequency using the dial.
Quick frequency adjustment.
Setting the frequency tuning increment.
How to operate via repeaters using duplex mode.
Setting up selective calling tones.
List of available CTCSS frequencies.
List of available DCS codes.
How to enter and navigate memory mode.
Steps to store frequencies and settings in memory.
How to save current settings to a memory channel.
Procedure for removing stored channels.
List of data types that can be stored.
How to access the quick recall channel.
Steps for listening to incoming signals.
Procedure for sending signals.
How to choose transmission power levels.
Information on automatic power reduction.
How to access the settings menu.
Overview of available settings.
Configuring frequency tuning increments.
Defining how the scan resumes.
Enabling or disabling key touch beeps.
Setting transmit time limits.
Penalty time after TOT.
Automatic shut-off feature.
Setting tone burst frequencies for repeaters.
Prohibits transmission on busy channels.
Configuring and using the theft alarm feature.
Assigning text labels to memory channels.
Adjusting display brightness.
General use of scanning for signals.
Scanning through VFO frequencies.
Scanning through programmed memory channels.
Scanning within a defined frequency range.
Searching for CTCSS tones.
Searching for DCS codes.
Preventing accidental key presses.
Transmitting tone bursts to activate repeaters.
Enabling digital voice with optional unit.
Adjusting bandwidth for transmission/reception.
Transmitting programmed DTMF tones.
Configuring and using the theft alarm feature.
Copying settings between units.
Connecting and using the EJ-41U unit.
Configuring packet mode parameters.
Caution for battery replacement.
Wiring for packet operation with external TNC.
Pinout details for the DSUB-9 connector.
Configuration for 1200bps data.
Configuration for 9600bps data.
Using the transceiver with APRS.
Connecting a GPS receiver for APRS.
Initiating and controlling APRS mode.
Operating the transceiver using microphone DTMF keys.
Mapping of DTMF keys to functions.
How to input frequencies using DTMF.
How tuning step affects frequency entry.
How to restore factory default settings.
Common problems and their solutions.
Lists available microphone accessories.
Lists other optional cables and units.
Technical details for different models.
Introduction to TNC commands.
Explains parameters for TNC commands.
To Next Page
